Tunnel top sections

The tunnel consists of:

• Pipe stand in 19 x 1.2 mm zendzirmir galvanized pipes, which are assembled with PE High Density fittings.
• 2 end gables in insect netting with drawstring, which are pulled onto the pipe stand. On the outside there is velcro, which is used to fasten the cover in the longitudinal direction (long side). At the bottom of the end gable there is also velcro, which closes tightly against the raised bed.
• 1 cover in insect netting.
• 6 velcro rails of 113 cm, which are pushed into the groove on the planks in GrowCamp's PVC raised beds. The Velcro rails are used to attach the cover to the long side of the raised bed.

Set consisting of a plastic cover, which has a length of 240 cm, and 2 loose ends with velcro closure.

The tunnel consists of:

• Pipe stand in 19 x 1.2 mm zendzirmir galvanized pipes, which are assembled with PE High Density fittings.
• 2 end gables in insect netting with drawstring, which are pulled onto the pipe stand. On the outside there is velcro, which is used to fasten the cover in the longitudinal direction (long side). At the bottom of the end gable there is also velcro, which closes tightly against the raised bed.
• 1 cover in insect netting.
• 8 velcroskinner 113 cm, which are pushed into the groove on the planks in GrowCamp's PVC raised beds. The Velcro rails are used to attach the cover to the long side of the raised bed.

Set consisting of a plastic cover, which has a length of 360 cm, and 2 loose ends with velcro closure.

The tunnel consists of:

• Pipe stand in 19 x 1.2 mm zendzirmir galvanized pipes, which are assembled with PE High Density fittings.
• 2 end gables in insect netting with drawstring, which are pulled onto the pipe stand. On the outside there is velcro, which is used to fasten the cover in the longitudinal direction (long side). At the bottom of the end gable there is also velcro, which closes tightly against the raised bed.
• 1 cover in insect netting.
• 6 velcro rail 113 cm, which are provided with screws for bolting on wood raised beds. The velcro rails are used to attach the cover to the long side of the raised bed.

The tunnel consists of:

• Pipe stand in 19 x 1.2 mm zendzirmir galvanized pipes, which are assembled with PE High Density fittings.
• 2 end gables in insect netting with drawstring, which are pulled onto the pipe stand. On the outside there is velcro, which is used to fasten the cover in the longitudinal direction (long side). At the bottom of the end gable there is also velcro, which closes tightly against the raised bed.
• 1 cover in insect netting.
• 8 velcro rail 113 cm, which are provided with screws for bolting on wood raised beds. The velcro rails are used to attach the cover to the long side of the raised bed.

The tunnel consists of:

• Pipe stand in 19 x 1.2 mm zendzirmir galvanized pipes, which are assembled with PE High Density fittings.
• 2 end gables in insect netting with drawstring, which are pulled onto the pipe stand. On the outside there is velcro, which is used to fasten the cover in the longitudinal direction (long side). At the bottom of the end gable there is also velcro, which closes tightly against the raised bed.
• 1 cover in insect netting.
• 4 velcro rails which are provided with screws for bolting on wood raised beds. The velcro rails are used to attach the cover to the long side of the raised bed.

The tunnel consists of:

• Pipe stand in 19 x 1.2 mm zendzirmir galvanized pipes, which are assembled with PE High Density fittings.
• 2 end gables in insect netting with drawstring, which are pulled onto the pipe stand. On the outside there is velcro, which is used to fasten the cover in the longitudinal direction (long side). At the bottom of the end gable there is also velcro, which closes tightly against the raised bed.
• 1 cover in insect net.
• 4 velcro rails which are pushed into the groove on the planks in GrowCamp's PVC raised beds. The Velcro rails are used to attach the cover to the long side of the raised bed.